SGI O2 R5k power supply ?

Alvin Oga alvin at Mail.Linux-Consulting.com
Thu Dec 18 17:08:28 PST 2003


hi ya

On Thu, 18 Dec 2003, richard childers / kg6hac wrote:

> You can probably pick up a volt-ohm meter at Radio Shack for less than 
> $15, and test to see if your power supply is putting out a solid 5 and 
> 12 VDC, or not, very easily.

you cannot test a power supply with a volt-ohm meter other than
to tell you its on or off ...
	- wont tell you if its good or bad
	- but its a start ...

you probably should use a (storage) scope to look for glitches and
surges and load regulation .. glitches and surges is what makes
the "bad supply" go bonkers
	- and good load ( like the real system connected to the ps )
	vs a simulated load like a giant resistor 

fun stuff to test power supply ... especially when you do soemthing
wrong and let out the blue smoke, after that, it just wont work
if you let out the blue smoke ..

c ya
alvin




More information about the Baylisa mailing list